JSON   RDF   ISO19115/ISO19139 XML

CLM - Bore assignments QLD


The dataset was derived by the Bioregional Assessment Programme from multiple source datasets. The source datasets are identified in the Lineage field in this metadata statement. The processes undertaken to produce this derived dataset are described in the History field in this metadata statement.

This dataset contains the aquifer assignment results for the Queensland part of the Clarence-Moreton Basin. The data were organized by hydrostratigraphic units. Assigning a bore to a specific aquifer is underpinned by the screened interval data and the aquifer boundaries. In many cases, it is impossible to assign the screened interval of a bore to a single aquifer as bores are either screened across different aquifers or there is insufficient information on stratigraphy and screened intervals. Bores were assigned to aquifers by comparing their screen intervals and depth with aquifer boundary data. The required information was extracted from the "Casing", "Aquifer", and "Stratigraphy" tables of the DNRM database.

Dataset History

The following steps were followed during the aquifer assignment:

  1. Determine the boundary of the aquifer of interest. The 'Aquifer' table in the DNRM database registers aquifers that a bore intersects when it is drilled and records the upper and lower extents of aquifers. This information was used to identify the aquifer boundary at any specific location. When boundary information was missing the 'Stratigraphy' table was used to identify aquifer boundaries instead.

Determine the screen interval of bores. Refer to theThe 'Casing' table contains the screen information for most bores in the database. The codes 'PERF', 'SCRN' and 'ENDD' in the column 'MATERIAL' indicate water entry locations. The code 'OPEN' indicates that a bore is uncased at some depths; if bores intersect an aquifer, then they are considered as water supply points. These codes were used to find the screen interval of a bore. When multiple screens exist, the bore is assumed to be screened across the entire length of the individual screens.

  1. Determine the screen code. A bore may tap into an aquifer in four ways depending on its screen location in aquifers. Four codes (I, T, B and E) were used to indicate the different spatial relationship of a bore with its targeted aquifer. When screen information is lacking, bores with their lower ends located in an aquifer are assumed to be tapped to that aquifer and were assigned a screen code 'BOI'.

  2. Filter bores for a specific area using a shape file or coordinates. If only a part of the aquifer is of interest, then the output bores can be filtered based on their locations.

  3. Cross-check the final datasets against expert knowledge and spatial context of aquifers. As errors are common in such databases, some errors will still persist despite extensive data quality checks. However, such errors are often highlighted during data interpretation and visual representation and can subsequently be corrected through an iterative process.

Dataset Citation

Bioregional Assessment Programme (2014) CLM - Bore assignments QLD. Bioregional Assessment Derived Dataset. Viewed 28 September 2017, http://data.bioregionalassessments.gov.au/dataset/f8937dd8-b3a0-490e-a452-9dc56fe03914.

Dataset Ancestors

Data and Resources

Additional Info

Field Value
Title CLM - Bore assignments QLD
Type Dataset
Language eng
Licence Creative Commons Attribution 4.0 International, http://creativecommons.org/licenses/by/4.0/, (c) Commonwealth of Australia (Bioregional Assessment Programme http://www.bioregionalassessments.gov.au), (c) State of Queensland (Department of Natural Resources and Mines), (c) Commonwealth of Australia (Bureau of Meteorology)
Data Status active
Update Frequency never
Landing Page https://data.gov.au/data/dataset/9daa98fd-dd3e-45b3-954e-39bfdf3210c9
Date Published 2017-07-06
Date Updated 2022-04-13
Contact Point
Bioregional Assessment Program
Temporal Coverage 2017-07-06 00:00:00
Geospatial Coverage POLYGON ((0 0, 0 0, 0 0, 0 0))
Jurisdiction NONE
Data Portal data.gov.au
Publisher/Agency Bioregional Assessment Program