JSON   RDF   ISO19115/ISO19139 XML

Mean residual water level error - Gippsland 1980

Abstract

This dataset was supplied to the Bioregional Assessment Programme by a third party and is presented here as originally supplied. Metadata was not provided and has been compiled by the Bioregional Assessment Programme based on known details at the time of acquisition.

The spatial distributions of residual water level errors are presented for 1980, 1990, 2000 and 2010. The mean residual water level is defined such that negative numbers refer to points where predicted groundwater head values are higher than observed and positive values indicate that predicted groundwater head values are lower than observed.

The dataset was generated in the Gippsland Groundwater Model (Beverly et al 2015). The 1980 residual error reflects the difference between the simulated and the measured water level surfaces at groundwater monitoring bores across all aquifers.

Purpose

The purpose of the residual error data layer is to provide an indication of the modelled groundwater level surfaces performance relative measured groundwater level data as of 1980.

"Results .. suggest that the model over predicts the heads in the outcropped regions and under predicts the heads in the lower parts of the landscape. The greatest errors are shown to be in the outcropping regions ....suggesting that the model attribution associated with model layer 23 requires further analysis. This is consistent with observations reported .....that considered the hydraulic conductivities attributed to zones 23-29 were on the lower bounds of previously reported values."

Extract from the Gippsland groundwater model technical report (Beverly et al, 2015)

Dataset History

Measured groundwater level sourced from the Victorian groundwater database and reported as metres above sea level. The 1980 simulated water level sourced from the Gippsland Groundwater Model (Beverly et al 2015). Calculation made by Measured minus Simulated.

Dataset Citation

Victorian Department of Economic Development, Jobs, Transport and Resources (2015) Mean residual water level error - Gippsland 1980. Bioregional Assessment Source Dataset. Viewed 05 October 2018, http://data.bioregionalassessments.gov.au/dataset/311d42b0-e7c5-4abe-b7cc-6d039d39eb11.

Data and Resources

Additional Info

Field Value
Title Mean residual water level error - Gippsland 1980
Type Dataset
Language eng
Licence Creative Commons Attribution 4.0 International, http://creativecommons.org/licenses/by/4.0/, (c) Commonwealth of Australia (Bioregional Assessment Programme http://www.bioregionalassessments.gov.au)
Data Status completed
Update Frequency unknown
Landing Page https://data.gov.au/data/dataset/60055774-22f0-455d-b186-c02155fbc396
Date Published 2018-10-05
Date Updated 2018-10-05
Contact Point
Bioregional Assessment Programme
bioregionalassessments@bom.gov.au
Temporal Coverage N/A - N/A
Geospatial Coverage POLYGON ((0 0, 0 0, 0 0, 0 0))
Jurisdiction Victoria
Data Portal data.gov.au
Publisher/Agency Bioregional Assessment Programme