From Geoscience Australia
JSON format icon JSON RDF format icon RDF ISO19115-3 XML

National Gravity Compilation 2019 DGIR tilt grid

Created 17/10/2025

Updated 17/10/2025

JSON format icon JSON RDF format icon RDF ISO19115-3 XML

Gravity data measure small changes in gravity due to changes in the density of rocks beneath the Earth's surface. The data collected are processed via standard methods to ensure the response recorded is that due only to the rocks in the ground. The results produce datasets that can be interpreted to reveal the geological structure of the sub-surface. The processed data is checked for quality by GA geophysicists to ensure that the final data released by GA are fit-for-purpose. This National Gravity Compilation 2019 DGIR tilt grid is produced from the 2019 Australian National Gravity Grids A series. These gravity data were acquired under the project No. 202008. The grid has a cell size of 0.00417 degrees (approximately 435m). The data are derived from ground observations stored in the Australian National Gravity Database (ANGD) as at September 2019, supplemented by offshore data sourced from v28.1 of the Global Gravity grid developed using data from the Scripps Institution of Oceanography, the National Oceanic and Atmospheric Administration (NOAA), and National Geospatial-Intelligence Agency (NGA) at Scripps Institution of Oceanography, University of California San Diego. Out of the approximately 1.8 million gravity observations, nearly 1.4 million gravity stations in the ANGD together with marine data were used to generate this grid. The ground gravity data used in the national grid has been acquired by the Commonwealth, State and Territory Governments, the mining and exploration industry, universities and research organisations from the 1940's to the present day. Station spacing for ground observations varies from approximately 11 km down to less than 1 km, with major parts of the continent having station spacing between 2.5 and 7 km. The DGIR was obtained by subtracting 3 quantities (i.e., the near-field isostatic correction, the far-field isostatic correction, and a first order trend correction) from Complete Bouguer Anomaly data (CBA) of the 2019 Australian National Gravity Grids A series. The grid shows a tilt of the de-trended global isostatic residual (DGIR) anomalies (A series) over Australia and its continental margins. A tilt filter was calculated by applying a fast Fourier transform (FFT) process to the DGIR grid of the 2019 Australian National Gravity Grids A series. A tilt filter is a ratio of the vertical derivative to the total horizontal derivative and is used for detection of edges of geological units.

Files and APIs

Tags

Additional Info

Field Value
Title National Gravity Compilation 2019 DGIR tilt grid
Language eng
Licence Not Specified
Landing Page https://data.gov.au/data/en/dataset/cf84626b-5e29-4dbe-afc7-8ede20eeb5ea
Contact Point
Geoscience Australia Data
clientservices@ga.gov.au
Reference Period 19/06/2019 - 01/10/1947
Geospatial Coverage
Map data © OpenStreetMap contributors
{
  "coordinates": [
    [
      [
        107.9979,
        -48.0021
      ],
      [
        164.0021,
        -48.0021
      ],
      [
        164.0021,
        -7.9979
      ],
      [
        107.9979,
        -7.9979
      ],
      [
        107.9979,
        -48.0021
      ]
    ]
  ],
  "type": "Polygon"
}
Data Portal Geoscience Australia

Data Source

This dataset was originally found on Geoscience Australia "National Gravity Compilation 2019 DGIR tilt grid". Please visit the source to access the original metadata of the dataset:
https://ecat.ga.gov.au/geonetwork/srv/eng/csw/dataset/national-gravity-compilation-2019-dgir-tilt-grid