From Geoscience Australia
JSON format icon JSON RDF format icon RDF ISO19115-3 XML

Self-Calibration of wet troposphere delay and clock phase variations for VLBI data analysis

Created 16/10/2025

Updated 16/10/2025

JSON format icon JSON RDF format icon RDF ISO19115-3 XML

The wet tropospheric component and clock phase variations are the most important factors that limit the accuracy of the geodetic VLBI products. These fast fluctuations can be introduced into the parametric model as a correlated stochastic noise and treated in a special way using the least square collocation method (LSCM). An a-priori covariance function is used to construct the non-diagonal covariance matrix. We have developed a procedure to calculate the wet troposphere delay and the clock offset for each observation epoch. The wet troposphere delays calculated by the LSCM are in perfect agreement with the water vapour radiometer (WVR) data, within the uncertainty of 2-3 mm. This information is then incorporated into the NGS data file and used in the second iteration. As a result, the procedure for analysing the VLBI data becomes simpler and faster, since the remaining observational error is Gaussian, and the matrix of the observational covariance can be treated as diagonal. For the calibrated VLBI data, the simple least squares method (without breaking the 24-hour experiment into small bins) is applied, followed by a reduction in the number of estimated parameters. All VLBI data between 1993 and 2023 were processed with pre-calibrated tropospheric and clock delays. The result was tested with two independent software packages, OCCAM and VieVS, and showed a good efficiency with respect to the traditional approach. The accuracy of the estimates reaches: 1 mm for VLBI site positions, 3 µas for UT1-UTC values, 40 mas for X- and Y-pole components. The formal error of the most observed ICRF reference radio source positions drops to 1-2 µas, and the ”floor” (or ”inflated”) error for the future ICRF realization would also be reduced. This paper shows that the new data analysis procedure produces results which align with the announced VGOS goals for the S/X VLBI data. Finally we report a detection of the negative parallax effect with an amplitude of −15.8(±0.5) µas.

Abstract presented at the 2024 13th General Meeting of the International VLBI Service for Geodesy and Astrometry (IVS), Tsukuba, Japan

Files and APIs

Tags

Additional Info

Field Value
Title Self-Calibration of wet troposphere delay and clock phase variations for VLBI data analysis
Language eng
Licence Not Specified
Landing Page https://data.gov.au/data/dataset/5dd9bcd2-b3f2-481b-b011-f05228b606a8
Contact Point
Geoscience Australia Data
clientservices@ga.gov.au
Reference Period 15/07/2024
Geospatial Coverage
Map data © OpenStreetMap contributors
{
  "coordinates": [
    [
      [
        112.92,
        -54.75
      ],
      [
        159.11,
        -54.75
      ],
      [
        159.11,
        -9.2402
      ],
      [
        112.92,
        -9.2402
      ],
      [
        112.92,
        -54.75
      ]
    ]
  ],
  "type": "Polygon"
}
Data Portal Geoscience Australia

Data Source

This dataset was originally found on Geoscience Australia "Self-Calibration of wet troposphere delay and clock phase variations for VLBI data analysis". Please visit the source to access the original metadata of the dataset:
https://ecat.ga.gov.au/geonetwork/srv/eng/csw/dataset/self-calibration-of-wet-troposphere-delay-and-clock-phase-variations-for-vlbi-data-analysis