From Australian Oceans Data Network
JSON format icon JSON RDF format icon RDF ISO19115-3 XML

Passive acoustic data from sonobuoys deployed during the 2013 Antarctic Blue Whale Voyage

Created 18/11/2025

Updated 18/11/2025

JSON format icon JSON RDF format icon RDF ISO19115-3 XML

This dataset contains acoustic recordings from Directional Frequency Analysis and Recording (DIFAR) sonobuoys that were deployed during the 2013 Antarctic blue whale voyage. During the 47 day voyage 360 sonobuoys were deployed yielding 733 hours of acoustic recordings. On average, slightly more than eight sonobuoys were used per survey day. Ninety three sonobuoys were deployed in transit to or from the edge of the sea-ice while the remainder were deployed to monitor and target Antarctic blue whales. The telemetered audio from sonobuoys was monitored aurally and visually (via spectrogram) in real-time by one or more on-duty acousticians. A total team of five dedicated acousticians monitored round-the-clock for blue whales and in all weather conditions. Upon detection of blue whale vocalisations the vessel was directed towards the locations of these sounds. After deployment, sonobuoys sent acoustic and directional data to the ship via a VHF radio transmitter. Radio signals from the sonobuoy were received using an omnidirectional VHF antenna (PCTel Inc. MFB1443; 3 dB gain tuned to 144 MHz centre frequency) and pre-amplifier (Minicircuits Inc. ZX60-33LN-S+) mounted on the mast of the ship at a height of 21 m. The preamplifier was connected to a power splitter via LMR400 cable and signals were received with two WiNRaDiO G39WSBe sonobuoy receivers. The radio signal from sonobuoys was adequate for monitoring and localization out to a typical range of 12-15 nmi. Received signals were digitised via a sound board (RME Fireface; RME Inc.), and signals were recorded on a personal computer using the software program PAMGuard (Gillespie et al. 2008). Three models of sonobuoys were used during the voyage: 79 were AN/SSQ-53D (Ultra Electronics, Canada), 81 were AN/SSQ-53F (Ultra Electronics: SonobuoyTechSystems, USA) and 200 were AN/SSQ-955-HIDAR (deployed in DIFAR compatibility mode; Ultra Electronics Sonar Systems, UK). In addition to recording of Antarctic blue whale song, New Zealand type blue whale song, and blue whale "D-call" vocalisations, these recordings also contain vocalisations from fin whales, humpback whales, sei whales, killer whales, sperm whales, as well as low frequency sounds from Antarctic sea ice.

Files and APIs

Tags

Additional Info

Field Value
Title Passive acoustic data from sonobuoys deployed during the 2013 Antarctic Blue Whale Voyage
Language eng
Licence Not Specified
Landing Page https://data.gov.au/data/dataset/42a7b257-e54d-4041-bdfa-59a07ee744d9
Contact Point
Australian Ocean Data Network
metadata@aad.gov.au
Reference Period 31/01/2013 - 15/03/2013
Geospatial Coverage
Map data © OpenStreetMap contributors
{
  "coordinates": [
    [
      [
        140.0,
        -70.0
      ],
      [
        170.0,
        -70.0
      ],
      [
        170.0,
        -40.0
      ],
      [
        140.0,
        -40.0
      ],
      [
        140.0,
        -70.0
      ]
    ]
  ],
  "type": "Polygon"
}
Data Portal Australian Oceans Data Network

Data Source

This dataset was originally found on Australian Oceans Data Network "Passive acoustic data from sonobuoys deployed during the 2013 Antarctic Blue Whale Voyage". Please visit the source to access the original metadata of the dataset:
https://catalogue.aodn.org.au/geonetwork/srv/eng/csw/dataset/passive-acoustic-data-from-sonobuoys-deployed-during-the-2013-antarctic-blue-whale-voyage1