From Australian Oceans Data Network
JSON format icon JSON RDF format icon RDF ISO19115-3 XML

Manly Hydraulics Laboratory - Port Kembla Offshore Wave Data Buoy (WAVEPOK)

Created 24/06/2025

Updated 24/06/2025

JSON format icon JSON RDF format icon RDF ISO19115-3 XML

This is a metadata record for the Port Kembla offshore wave data buoy (station code WAVEPOK) operated by Manly Hydraulics Laboratory (MHL), NSW Office of Environment and Heritage (OEH). The buoy is moored off Port Kembla at a water depth of approximately 75m. This metadata record includes a down-loadable .pdf summary document which includes a map with numbered deployment locations and a listing of deployment number, location, water depth and deployment period. Data from February 1974 to June 2012 was gathered by the Waverider system developed by the Dutch company, Datawell. The Waverider system uses an accelerometer mounted in a loose tethered buoy (0.7 or 0.9m in diameter) to measure the vertical accelerations of the buoy as it moves with the water surface. The accelerations are integrated twice within the buoy and the displacement signal so obtained is then transmitted to a shore station where it is processed to provide wave data statistics. In June 2012, the station was upgraded with a Datawell Directional Waverider buoy. The Directional Waverider buoy utilises a heave-pitch-roll sensor, two fixed X and Y accelerometers and a three axis fluxgate compass to measure both vertical and horizontal motion. An on-board processor converts the buoy motion to three orthogonal (vertical, north-south, east-west) translation signals that are transmitted to the shore station. The directional spectrum is also routinely transmitted to the receiving station for further processing. This buoy also collects sea surface temperature (SST) data from thermistors that are mounted inside the hull of the buoys, at the base of the buoy about 0.5m below the water surface. The wave and SST data are stored on the receiving station PC before routine transfer to Manly Hydraulics Laboratory via email.

Files and APIs

Tags

Additional Info

Field Value
Title Manly Hydraulics Laboratory - Port Kembla Offshore Wave Data Buoy (WAVEPOK)
Language eng
Licence Not Specified
Landing Page https://data.gov.au/data/dataset/1165d11f-5620-461e-9fff-1bc98178d50a
Contact Point
Australian Ocean Data Network
MHL.Reception@mhl.nsw.gov.au
Reference Period 06/03/2019
Geospatial Coverage
Map data © OpenStreetMap contributors
{
  "coordinates": [
    [
      [
        150.95,
        -34.4833
      ],
      [
        151.01667,
        -34.4833
      ],
      [
        151.01667,
        -34.45
      ],
      [
        150.95,
        -34.45
      ],
      [
        150.95,
        -34.4833
      ]
    ]
  ],
  "type": "Polygon"
}
Data Portal Australian Oceans Data Network

Data Source

This dataset was originally found on Australian Oceans Data Network "Manly Hydraulics Laboratory - Port Kembla Offshore Wave Data Buoy (WAVEPOK)". Please visit the source to access the original metadata of the dataset:
https://catalogue.aodn.org.au/geonetwork/srv/eng/csw/dataset/manly-hydraulics-laboratory-port-kembla-offshore-wave-data-buoy-wavepok1