f4c3d3f2-220d-4466-9f57-a7a43ccefdad urn:uuid eng UTF-8 nonGeographicDataset nonGeographicDataset 2025-06-25T01:03:31 creation ISO 19115 2016 CCS - MV Bluefin 2017 V01 TSG f4c3d3f2-220d-4466-9f57-a7a43ccefdad Project Overview: A range of solutions will be required to reach globally agreed emissions reductions targets for carbon dioxide (CO2). Carbon capture and storage (CCS) is part of the suite of technologies that will contribute to lowering atmospheric emissions of CO2 from Australia's energy system. There are a wide variety of technologies at various stages of technical and commercial readiness, with more development underway for cost effective CO2 capture and storage. Our research will provide new knowledge to inform cost-efficient measurement, monitoring and verification (MMV) of the environment of CCS projects in coastal waters. --o-- A Seabird model SBE-45 thermo-salinograph was installed in the carbon team’s container and measured seawater from the ship’s auxiliary seawater pump for the duration of the voyage. Survey settings: A flow of 1.6-1.8 litres per minute was maintained through the instrument. Readings were recorded once per minute. Calibration Information: The instrument is new and was calibrated by the manufacturer in 2017. Salinity samples were collected for later analysis and a correction will be applied if needed. {"type": "Polygon", "coordinates": [[[147.3286, -38.3282], [147.4792, -38.3282], [147.4792, -38.1902], [147.3286, -38.1902], [147.3286, -38.3282]]]} 147.3286 147.4792 -38.3282 -38.1902