Woolloongabba (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/1066c249-5508-4266-921d-02071af0ce90/download/woolloongabba-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.4975; Longitude: 153.0350 **AS/NZS 3580.1.1:2007 site classification:** Peak (roadside) **AS/NZS 3580.1.1:2007 compliance (pollutants):** Complies fully **AS/NZS 3580.14:2011 compliance (meteorology):** Complies, except for: * Railway overpass embankment located within 20 metres north of the monitoring site. * Elevated busway and 4-storey busway station building located within 30 metres south to southwest of the monitoring site. * No obstructions in direction of roadway. * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor * Height above ground level: 10 metres. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Carbon monoxide:** Infrared absorption analyser operated in accordance with AS 3580.7.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5 (to 18 June):** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected partic…
format: CSV
issued: 2020-04-16T22:38:33.039989
modified: 2025-11-11T11:17:46.258778
checksum: Checksum

Fisherman's Landing (Gladstone) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/3ed4c267-d2ee-451a-84bf-0ed205f8dd22/download/fishermanslanding-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -23.7937; Longitude: 151.1601 **AS/NZS 3580.1.1 site classification:** Peak (industry) **AS/NZS 3580.1.1 compliance (pollutants):** Complies, except for: * situated within 10 metres of edge of unsealed road **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +10 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor. * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor. * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Methane:** Off-Axis Integrated Cavity Output Spectroscopy (OA-ICOS) operated in accordance with AS/NZS 3580.17 (not operational in 2019) **PM10/PM2.5:** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output…
format: CSV
issued: 2020-04-19T22:58:09.364107
modified: 2025-11-11T11:17:46.192308
checksum: Checksum

Fisherman Island (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/187a1d6a-78f0-4a76-acbe-d13c54aee976/download/fishermanisland-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -23.3833; Longitude: 153.1623 **AS/NZS 3580.1.1 site classification:** Peak (industry) **AS/NZS 3580.1.1 compliance (pollutants):** Complies **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor. * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor. * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Sulfur dioxide (from 22 February):** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5 (from 16 May):** Scattered light spectrometry (TAPI Model 640X) operated in accordance with USEPA equivalence method designation requirements * Reported concentrations are uncorrected instrument output values.
format: CSV
issued: 2020-04-19T23:02:57.268009
modified: 2025-11-11T11:17:46.190111
checksum: Checksum

Cannon Hill (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/edd15a43-c11b-4f8b-aaf6-aa99d42ccb55/download/cannonhill-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 (particle measurements impacted by car park development earthworks next to station from 1 October to 31 December) **Site location:** Latitude: -27.4654; Longitude: 153.0872 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor **Wind sensor:** Ultrasonic sensor * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres. **Ozone:** UV absorption analyser operated in accordance with AS/NZS 3580.6.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5:** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * The reported PM10 and PM2.5 concentrations are calculated from running 1-hour average concentrations updated at six minute intervals. * Negative hourly PM10/PM2.5 concentrations down to -5 µg/m^3 resulting from instrument noise at low particle concentrations are reported. **TSP:** Tapered Element Oscillating Microbala…
format: CSV
issued: 2020-04-19T23:27:16.413734
modified: 2025-11-11T11:17:46.179106
checksum: Checksum

Abbot Point (Bowen) 2019 hourly meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/1eed14b2-4e91-4163-90ef-b2afe1d90172/download/bowen-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -19.9496; Longitude: 148.0482 **AS/NZS 3580.1.1 site classification:** Background **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind sensor:** Ultrasonic sensor. * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +8 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor. * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor. * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres.
format: CSV
issued: 2020-04-16T22:24:48.825111
modified: 2025-11-11T11:17:46.162114
checksum: Checksum

Lytton (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/54b03a65-95b2-4f17-8027-67196d04c2df/download/lytton-aq-2019.csv
media type: text/csv
description: **Industry-operated monitoring site:** Data presented as received by Queensland Government **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.4064; Longitude: 153.1527 **AS/NZS 3580.1.1 site classification:** Peak (industry) **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology)** : Complies, except for: * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind sensor:** Ultrasonic sensor * Height above ground level: 10 metres. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 **PM10/PM2.5:** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-D operated in accordance with AS/NZS 3580.9.13 (excluding FDMS requirements) * Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * Negative hourly PM10/PM2.5 concentrations down to -5 µg/m^3 resulting from instrument noise at low particle concentrations are reported.
format: CSV
issued: 2020-04-17T01:44:27.069880
modified: 2025-11-11T11:17:46.203412
checksum: Checksum

Townsville Coast Guard (Townsville) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/7dd1c127-a640-4ac5-8baa-eaab61e2f745/download/townsvillecoastguard-aq-2019.csv
media type: text/csv
description: **Joint Queensland Government / industry-operated monitoring site:** Data validation conducted by the Queensland Government. **Period of operation:** 1 January to 31 December 2019 **Site location** Latitude: -19.2542; Longitude: 146.8257 **AS/NZS 3580.1.1 site classification:** Peak (port operations) **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Trees within 5 metres to the west of the industry/joint monitoring station (no obstructions in direction of port operations). * Monitoring station located on asphalt surface. * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind sensor:** Ultrasonic sensor * Height above ground level: 10 metres. **Temperature:** Negative temperature coefficient (NTC) thermistor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Doppler radar * Height above ground level: 10 metres. **Barometric pressure:** MEMS capacitive pressure sensor * Height above ground level: 10 metres. **Solar radiation:** Thermopile * Height above ground level: 10 metres. **PM10:** Scattered light spectrometry (TAPI Model 640X) operated in accordance with USEPA equivalence method designation requirements * Reported concentrations are uncorrected instrument output values. **TSP:** Tapered Element Oscillating Microbalance (TEOM) Model 1405 fitted with TSP inlet and operated in accordance with AS/NZS 3580.9.16 (excluding FDMS requirements) * Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * Negative hourly TSP concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3.
format: CSV
issued: 2020-04-16T22:51:12.200479
modified: 2025-11-11T11:17:46.245515
checksum: Checksum

Mountain Creek (Sunshine Coast, South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/4b982a1f-d9be-4e4a-8ada-6e17aba23fda/download/mountaincreek-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -26.6918; Longitude: 153.1044 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies fully **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor **Ozone:** UV absorption analyser operated in accordance with AS/NZS 3580.6.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10:** Tapered Element Oscillating Microbalance (TEOM) Model 1405 operated in accordance with AS/NZS 3580.9.16 (excluding FDMS requirements) * Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * Negative hourly PM10 concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3. **Visibility-reducing particles:** Nephelometer operated in accordance with AS/NZS 3580.12.1 * Detector spectral response centred at 530 nm. * Instrument output offset and/or scaled based on calibration and daily zero/span response data.
format: CSV
issued: 2020-04-17T01:19:03.078101
modified: 2025-11-11T11:17:46.214298
checksum: Checksum

Hopeland (South West Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/816e8e64-dc20-4449-beeb-da579c10dda8/download/hopeland-aq-2019.csv
media type: text/csv
description: **Industry-operated monitoring site:** Data presented as received by Queensland Government **Period of operation:** 1 January to 31 December 2019 **Site location:** Within 5 km of Hopeland town centre **AS/NZS 3580.1.1 site classification:** Background **AS/NZS 3580.1.1 compliance (pollutants):** Complies **AS/NZS 3580.14 compliance (meteorology):** Complies **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. **Temperature:** Solid state thermistor sensor * Height above ground level: 2 metres. **Rain:** Tipping bucket rain gauge **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 2 metres. **Solar radiation:** Pyranometer **Ozone:** Ultraviolet photometry analyser operated in accordance with AS 3580.6.1 **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 **Carbon Monoxide:** Infrared absorption analyser operated in accordance with AS 3580.7.1 **Carbon dioxide/Methane:** Cavity ring-down spectroscopic method operated in accordance with AS 3580.17 **PM10/PM2.5/TSP:** Optical light scattering method using Palas Fidas 200 instrument.
format: CSV
issued: 2020-04-17T01:54:04.006654
modified: 2025-11-11T11:17:46.199238
checksum: Checksum

Boyne Island (Gladstone) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/7a414eac-e1e2-4a15-bd2f-6feb2dd155ca/download/boyneisland-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -23.9408; Longitude: 151.3507 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Located on eastern side of slope below a ridge running north-south. * Trees within 20 metres of the monitoring site. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +10 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor **Relative humidity (until 18 September):** Capacitive thin film polymer sensor **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Carbon monoxide:** Infrared absorption analyser operated in accordance with AS 3580.7.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5 (until 18 September):** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * The reported PM10 and PM2.5 concentrations are calculated from running 1-hour average concentrations updated at six minute intervals. * Negative hourly PM10/PM2.5 concentrations down to -5 µg/m^3 resulting from instrument noise at…
format: CSV
issued: 2020-04-19T23:35:33.710594
modified: 2025-11-11T11:17:46.173908
checksum: Checksum

Wynnum North (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/cc518dcb-3f29-4c55-84f5-36f44b20f44b/download/wynnumnorth-aq-2019.csv
media type: text/csv
description: **Industry-operated monitoring site:** Data presented as received by Queensland Government **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.4296; Longitude: 153.1581 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies fully * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind sensor:** Ultrasonic sensor * Height above ground level: 10 metres. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5:** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-D operated in accordance with AS/NZS 3580.9.13 (excluding FDMS requirements) * Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * Negative hourly PM10/PM2.5 concentrations down to -5 µg/m^3 resulting from instrument noise at low particle concentrations are reported.
format: CSV
issued: 2020-04-16T22:36:40.875228
modified: 2025-11-11T11:17:46.261483
checksum: Checksum

Springwood (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/5532c6d2-c32b-4efb-aa3e-21b277e48356/download/springwood-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.6125; Longitude: 153.1359 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies, except for: * Trees above height of PM10/PM2.5 inlets within 5 metres south and west of the monitoring site. **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Located below the upper level of a ridge running roughly northwest-southeast. * Trees within 10 metres of the monitoring site (below height of wind sensor). **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 3 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 3 metres. **Barometric pressure:** Capacitive silicon sensor * Height above ground level: 3 metres. **Ozone, nitric oxide, nitrogen dioxide, sulfur dioxide, benzene, toluene, xylenes (total) and formaldehyde:** Differential Optical Absorption Spectroscopy (DOAS) analyser operated in accordance with AS/NZS 3580.15 * Values are average concentrations over 250 metre light path running east-west from (-27.6117, 153.1382) to (-27.6125, 153.1359). * Instrument output offset and/or scaled based on instrument calibration data. **PM10/PM2.5:** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * The reported PM10 and PM2.5 concentrations are calculated from running 1-hour average concentrations upda…
format: CSV
issued: 2020-04-17T00:24:49.949950
modified: 2025-11-11T11:17:46.232454
checksum: Checksum

Targinie (Gladstone) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/1fcfe1bd-64eb-4744-aa4d-53432f777c29/download/targinie-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -23.7743; Longitude: 151.1060 **AS/NZS 3580.1.1 site classification:** Background **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Trees within 15 metres north west of the monitoring site. * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +10 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5 (to 17 September):** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * The reported PM10 and PM2.5 concentrations are calculated from running 1-hour average concentrations updated at six …
format: CSV
issued: 2020-04-16T22:56:04.613736
modified: 2025-11-11T11:17:46.240091
checksum: Checksum

Air Quality Monitoring - 2019
type: Dataset
contact point: Organization
keyword: environment
keyword: science
keyword: air quality
description: Annual hourly air quality and meteorological data by monitoring site for the 2019 calendar year. For more information on air quality, including live air data, please visit https://www.qld.gov.au/environment/pollution/monitoring/air. Data resolution: One-hour average values (one-hour sum for rainfall) Data row timestamp: Start of averaging period Missing data/not monitored: Blank cell Calm conditions: No hourly average wind direction is reported when the hourly average wind speed is zero Barometric pressure: Values are at monitoring station elevation, not corrected to mean sea level Daily zero/span response check: Automated instrument zero/span response checks are conducted daily between midnight and 1am at Queensland Government sites (can differ at industry sites). Where this takes place an ambient hourly value cannot be reported. Sampling height: Four metres above ground (unless otherwise indicated)
issued: 2025-11-11T11:17:46.279542
modified: 2025-11-11T11:17:51.743362
spatial: Location
version info: 1

Rocklea (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/a2b3f8f2-665c-413f-96bf-7634017bfe47/download/rocklea-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.5358; Longitude: 152.9934 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies, except for: * Isolated trees above height of inlet within 10 metres west of the monitoring site. **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Isolated trees within 10 metres west of the monitoring site. * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres. **Solar radiation:** Pyranometer **Ozone:** UV absorption analyser operated in accordance with AS/NZS 3580.6.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5:** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * The reported PM10 a…
format: CSV
issued: 2020-04-17T00:39:33.109764
modified: 2025-11-11T11:17:46.222813
checksum: Checksum

The Gap (Mount Isa) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/59138e25-d058-40af-92ab-dc395a3048de/download/thegap-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -20.7264; Longitude: 139.4977 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Buildings higher than wind sensor located within 20 metres north east and east of the monitoring site. * Monitoring shelter located on concreted surface. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +6 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 3 metres. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10:** Tapered Element Oscillating Balance (TEOM) Model 1405 operated in accordance with AS/NZS 3580.9.16 (excluding FDMS requirements) * Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * Negative hourly PM10 concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3.
format: CSV
issued: 2020-04-16T22:53:36.785961
modified: 2025-11-11T11:17:46.243031
checksum: Checksum

Moranbah (Moranbah) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/388e34ce-4a48-4a29-a706-eebeef335119/download/moranbah-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -21.9995; Longitude: 148.0713 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies fully **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +8 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor **PM10 (until 9 October):** Tapered Element Oscillating Balance (TEOM) Model 1405 operated in accordance with AS/NZS 3580.9.16 (excluding FDMS requirements) * Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * Negative hourly PM10 concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3. **PM10/PM2.5 (from 10 October):** Scattered light spectrometry (TAPI Model 640X) operated in accordance with USEPA equivalence method designation requirements - Reported concentrations are uncorrected instrument output values.
format: CSV
issued: 2020-04-17T01:29:22.586564
modified: 2025-11-11T11:17:46.211850
checksum: Checksum

Miles Airport (South West Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/348b7d8a-c5de-4fbc-b342-a40a8f170b62/download/milesairport-aq-2019.csv
media type: text/csv
description: **Industry-operated monitoring site:** Data presented as received by Queensland Government **Period of operation:** 11 October to 31 December 2019 (site offline until 11 October due to site power supply issues) **Site location:** 3.5 km east of Miles Airport **AS/NZS 3580.1.1 site classification:** Background **AS/NZS 3580.1.1 compliance (pollutants):** Complies **AS/NZS 3580.14 compliance (meteorology):** Complies **Temperature:** Solid state thermistor sensor * Height above ground level: 2 metres. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. **Rain:** Tipping bucket rain gauge **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 2 metres. **Solar radiation:** Pyranometer **Ozone:** Ultraviolet photometry analyser operated in accordance with AS 3580.6.1 **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 **Carbon Monoxide:** Infrared absorption analyser operated in accordance with AS 3580.7.1 **Carbon dioxide/Methane:** Cavity ring-down spectroscopic method operated in accordance with AS 3580.17 **PM10/PM2.5/TSP:** Optical light scattering method using Palas FIDAS 200 instrument
format: CSV
issued: 2020-04-17T01:31:51.494863
modified: 2025-11-11T11:17:46.209425
checksum: Checksum

Flinders View (Ipswich, South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/7e15b472-5a96-4ab6-bfa8-199246944e1c/download/flindersview-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.6529; Longitude: 152.7739 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies, except for: * Trees above the height of inlet within 10 metres of the monitoring site. **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Located on western side of slope below a ridge running northeast-southeast. * Trees within 10 metres of the monitoring site (below height of wind sensor). * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor * Height above ground level: 10 metres. **Ozone:** UV absorption analyser operated in accordance with AS/NZS 3580.6.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with S/NZS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10:** Tapered Element Oscillating Microbalance (TEOM) Model 1405 operated in accordance with AS/NZS 3580.9.16 (excluding FDMS requirement…
format: CSV
issued: 2020-04-19T22:55:42.866310
modified: 2025-11-11T11:17:46.194482
checksum: Checksum

Aldoga (Gladstone) 2019 hourly meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/fef9ba26-d680-4975-b033-37cc391f8066/download/aldoga-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -23.8409; Longitude: 151.0627 **AS/NZS 3580.1.1 site classification:** Background **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor. * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +10 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor. * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor. * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres.
format: CSV
issued: 2020-04-16T22:21:37.778168
modified: 2025-11-11T11:17:46.164827
checksum: Checksum

Auckland Point (Gladstone) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/3321a0a2-eb5f-4e9e-afc8-4bc95055af75/download/aucklandpoint-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -23.8349; Longitude: 151.2539 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Located on southern side of slope below a ridge. * Trees within 20 metres of the monitoring site. * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +10 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor * Height above ground level: 10 metres. **PM10:** Tapered Element Oscillating Microbalance (TEOM) Model 1405 operated in accordance with AS/NZS 3580.9.16 (excluding FDMS requirements) * Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * Negative hourly PM10 concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3..
format: CSV
issued: 2020-04-16T22:25:55.857668
modified: 2025-11-11T11:17:46.167070
checksum: Checksum

Clinton (Gladstone) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/755996e0-4a83-4b77-a148-7aaa0d346d0e/download/clinton-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -23.8701; Longitude: 151.2216 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Wind, temperature, relative humidity, rainfall and barometric pressure sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +10 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor. * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor. * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5 (until 27 March):** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * The reported PM10 and PM2.5 concentrations are calculated from running 1-hour average concentrations updated at six minute intervals. * …
format: CSV
issued: 2020-04-19T23:25:37.837448
modified: 2025-11-11T11:17:46.181507
checksum: Checksum

Josephville (South East Queensland) 2019 hourly meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/39410bfa-2d7d-4a9b-9665-afa14d0261e6/download/josephville-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.9962; Longitude: 152.9257 **AS/NZS 3580.1.1 site classification:** Background **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres.
format: CSV
issued: 2020-04-17T01:52:28.085170
modified: 2025-11-11T11:17:46.201320
checksum: Checksum

Brisbane CBD (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/1d404e6d-e2c7-4caa-9060-f308aae2903f/download/brisbanecbd-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.4774; Longitude: 153.0281 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies, except for: * Equipment located in room on sixth floor of building. * Nephelometer inlet located on eastern side of building, 1 metre out from building. * PM10 inlet located on building roof above equipment room, 1 metre above roof surface. * Building lift shaft higher than PM10 inlet located 8 metres south of inlet. **AS/NZS 3580.14 compliance (meteorology):** Complies, with exceptions: * Building lift shaft higher than wind sensor and within 10 metres of sensor. * Buildings higher than wind sensor located within 40 metres of sensor. **Wind:** Ultrasonic sensor * Height above roof level: 4 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above roof level: 4 metres. **Relative humidity**: Capacitive thin film polymer sensor * Height above roof level: 4 metres **Rainfall**: Vaisala RAINCAP® precipitation sensor * Height above roof level: 4 metres **Barometric pressure**: Capacitive silicon sensor * Height above roof level: 4 metres **PM10:** Tapered Element Oscillating Balance (TEOM) Model 1405-F fitted with Filter Dynamics Measurement System operated in accordance with AS/NZS 3580.9.16 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * The reported PM10 concentrations are calculated from running 1-hour average concentrations updated at six minute intervals. * Negative hourly PM10 concentrations down to -5 µg/m^3 resulting from instrument noise at low particle concentrations are reported. **Visibility-red…
format: CSV
issued: 2020-04-19T23:29:29.108186
modified: 2025-11-11T11:17:46.176201
checksum: Checksum

Collingwood Park (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/ecdc7c96-642e-4abd-becf-80ac361eaf20/download/collingwoodpark-aq-2019.csv
media type: text/csv
description: **Period of operation:** 12 February (site established) to 31 December 2019 **Site location: Latitude:** -27.6152; Longitude: 152.8675 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: - Wind, temperature and relative humidity sensors located 7 metres above ground level. - Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor - Height above ground level: 7 metres. - The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor - Height above ground level: 7 metres. **Relative humidity:** Capacitive thin film polymer sensor - Height above ground level: 7 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor - Height above ground level: 7 metres. **Barometric pressure:** Capacitive silicon sensor - Height above ground level: 7 metres. **PM10/PM2.5:** Scattered light spectrometry (TAPI Model 640X) operated in accordance with USEPA equivalence method designation requirements - Reported concentrations are uncorrected instrument output values.
format: CSV
issued: 2020-04-20T00:14:15.543290
modified: 2025-11-11T11:17:46.184059
checksum: Checksum

Wynnum West (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/c9ecf021-faa4-4d5a-93c7-7460c083d682/download/wynnumwest-aq-2019.csv
media type: text/csv
description: **Industry-operated monitoring site:** Data presented as received by Queensland Government **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.4379; Longitude: 153.1495 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies, except for: * Trees higher than sample inlets within 10m north-west of monitoring station. * Building below height of sample inlets within 10m east of monitoring station. **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Trees within 10m north-west of monitoring station. * Building below height of wind sensor within 10m east of monitoring station. * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind sensor:** Ultrasonic sensor * Height above ground level: 10 metres. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1. * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5:** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-D operated in accordance with AS/NZS 3580.9.13 (excluding FDMS requirements) * Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * Negative hourly PM10/PM2.5 concentrations down to -5 µg/m^3 resulting from instrument noise at low particle concentrations are reported.
format: CSV
issued: 2020-04-16T22:27:54.967303
modified: 2025-11-11T11:17:46.263783
checksum: Checksum

Mutdapilly (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/128a5f16-7705-47f3-a935-5e715de04230/download/mutdapilly-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.7530; Longitude: 152.6510 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor * Height above ground level: 10 metres. **Ozone:** UV absorption analyser operated in accordance with AS/NZS 3580.6.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data.
format: CSV
issued: 2020-04-17T00:55:16.465496
modified: 2025-11-11T11:17:46.216345
checksum: Checksum

Menzies (Mount Isa) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/1bfa4ac5-4653-4625-80f6-65b2fca209b8/download/menzies-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -20.7167; Longitude: 139.4920 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies, except for: * Trees above height of inlet within 10 metres of monitoring site. **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Trees within 10 metres of monitoring site. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +6 degrees to the sensor output value. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data.
format: CSV
issued: 2020-04-17T01:33:39.849390
modified: 2025-11-11T11:17:46.207376
checksum: Checksum

Southport (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/6006b302-b718-49d2-ba20-ddebac030208/download/southport-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.9612; Longitude: 153.4024 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies, except for: * Buildings below height of inlet within 5 metres north and east of the monitoring site * Isolated trees above height of inlet within 20 metres south of the monitoring site **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Isolated trees within 20 metres south of the monitoring site. * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind: Ultrasonic sensor** * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor * Height above ground level: 10 metres. **Ozone:** UV absorption analyser operated in accordance with AS/NZS 3580.6.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5:** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncor…
format: CSV
issued: 2020-04-17T00:28:56.890457
modified: 2025-11-11T11:17:46.229752
checksum: Checksum

South Gladstone (Gladstone) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/ca1a9793-933e-41e8-bd22-e22415ba8a3b/download/southgladstone-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -23.8627; Longitude: 151.2704 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Isolated trees within 20 metres of the monitoring site. * Temperature and relative humidity sensors located 10 metres above ground level * Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +10 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres. **Solar radiation:** Pyranometer **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5:** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * The reported PM10 and PM2.5 concentrations are calculated from running 1-hour average concentrations …
format: CSV
issued: 2020-04-17T00:32:44.321197
modified: 2025-11-11T11:17:46.227389
checksum: Checksum

Tara Region 2 (South West Queensland) 2019 hourly air quality data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/f3b290a9-80b3-41a3-a9fe-dc31f66cac29/download/tara2-aq-2019.csv
media type: text/csv
description: **Industry-operated monitoring site:** Data presented as received by Queensland Government **Period of operation:** 1 July (site established) to 31 December 2019 **Site location:** 17 km north of Tara town centre **AS/NZS 3580.1.1 site classification:** Background **AS/NZS 3580.1.1 compliance (pollutants):** Complies **AS/NZS 3580.14 compliance (meteorology):** Complies **Wind:** Ultrasonic sensor - Height above ground level: 10 metres. **Temperature:** Solid state thermistor sensor (sensor not operational in 2019) - Height above ground level: 2 metres **Relative humidity:** Capacitive thin film polymer sensor - Height above ground level: 2 metres **Rainfall:** Tipping bucket rain gauge **Solar radiation:** Pyranometer **Ozone:** Ultraviolet photometry analyser operated in accordance with AS 3580.6.1 **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1
format: CSV
issued: 2020-04-17T00:21:39.971296
modified: 2025-11-11T11:17:46.237811
checksum: Checksum

Townsville Environment Park (Townsville) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/2e91c9d0-aa06-44d0-b524-0672999d1562/download/townsvilleenvironmentpark-aq-2019.csv
media type: text/csv
description: **Industry-operated monitoring site:** Data presented as received by Queensland Government **Period of operation:** 1 July (site established) to 31 December 2019 **Site location: Latitude:** -19.2631; Longitude: 146.8308 **AS/NZS 3580.1.1 site classification:** Peak (port operations) **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: - Temperature and relative humidity sensors located 10 metres above ground level. - Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor - Height above ground level: 10 metres. **Temperature:** Negative temperature coefficient (NTC) thermistor - Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor - Height above ground level: 10 metres. **Rainfall:** Doppler radar **Barometric pressure:** MEMS capacitive pressure sensor **Solar radiation:** Thermopile **PM10:** Scattered light spectrometry (TAPI Model 640X) operated in accordance with USEPA equivalence method designation requirements - Reported concentrations are uncorrected instrument output values.
format: CSV
issued: 2020-04-20T02:00:23.437307
modified: 2025-11-11T11:17:46.247762
checksum: Checksum

Tara Region 1 (South West Queensland) 2019 hourly air quality data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/bbb09c3b-8a0d-4306-bbdd-c521ae203a26/download/tara1-aq-2019.csv
media type: text/csv
description: **Industry-operated monitoring site:** Data presented as received by Queensland Government **Period of operation:** 1 January to 31 August 2019 (site closed) **Site location:** 26 km south-southeast of Condamine town centre **AS/NZS 3580.1.1 site classification:** Background **AS/NZS 3580.1.1 compliance (pollutants):** Complies **Ozone:** Ultraviolet photometry analyser operated in accordance with AS 3580.6.1 **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 **Carbon Monoxide:** Infrared absorption analyser operated in accordance with AS 3580.7.1
format: CSV
issued: 2020-04-17T00:23:28.205007
modified: 2025-11-11T11:17:46.235590
checksum: Checksum

Environment, Tourism, Science and Innovation
type: Agent

Townsville Lennon Drive (Townsville) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/945f605f-b70e-4546-8151-a72b63b73e42/download/townsvillelennondrive-aq-2019.csv
media type: text/csv
description: **Industry-operated monitoring site:** Data presented as received by Queensland Government **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -19.2589; Longitude: 146.8264 **AS/NZS 3580.1.1 site classification:** Peak (port operations) **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. **Temperature:** Negative temperature coefficient (NTC) thermistor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Doppler radar **Barometric pressure:** MEMS capacitive pressure sensor **Solar radiation:** Thermopile **PM10:** Scattered light spectrometry (TAPI Model 640X) operated in accordance with USEPA equivalence method designation requirements * Reported concentrations are uncorrected instrument output values. **TSP (from 17 November):** Tapered Element Oscillating Microbalance (TEOM) Model 1405 fitted with TSP inlet and operated in accordance with AS/NZS 3580.9.16 (excluding FDMS requirements) - Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter. - Reported concentrations are uncorrected instrument output values. - Negative hourly TSP concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3.
format: CSV
issued: 2020-04-16T22:47:57.419798
modified: 2025-11-11T11:17:46.249776
checksum: Checksum

South Brisbane (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/747bb012-b23f-4c6c-a71e-d72c0d4ff973/download/southbrisbane-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.4848; Longitude: 153.0321 **AS/NZS 3580.1.1 site classification:** Peak (roadside) **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Wind measurements will be perturbed by elevated ground and roadways to the north and west of the monitoring site. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacative ceramic sensor **Relative humidity (to June 10):** Capacitive thin film polymer sensor **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Carbon monoxide:** Infrared absorption analyser operated in accordance with AS 3580.7.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5 (to June 10):** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * The reported PM10 and PM2.5 concentrations are calculated from running 1-hour average concentrations updated at six minute intervals. * Negative hourly PM10/PM2.5 concentrations down to -5 µg/m^3 resulting from instrument noise at low particle concentrations are reported. **PM10/PM2.5 (from 10 June):** Scattered light spectrometry (TAPI Model 640X) operated in accordance with USEPA equivalence method designation requirements * Reporte…
format: CSV
issued: 2020-04-17T00:34:11.316022
modified: 2025-11-11T11:17:46.224693
checksum: Checksum

Memorial Park (Gladstone) 2019 hourly air quality data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/7acdeab7-4f34-4a4f-b57b-8098a8fbf57b/download/memorialpark-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 (offline from 7 April to 29 July due to major equipment failure) **Site location:** Latitude: -23.8426; Longitude: 151.2534 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies, except for: * DOAS light path between 4 metres and 25 metres above ground level. **Ozone, nitrogen dioxide, sulfur dioxide, benzene, toluene, xylenes (total) and formaldehyde:** Differential Optical Absorption Spectroscopy (DOAS) analyser operated in accordance with AS/NZS 3580.15 * Reported value is average concentration over 520 metre light path running southwest-northeast from Memorial Park (-23.8443, 151.2517) to the Gladstone Entertainment Centre (-23.8409,151.2550). * Instrument output offset and/or scaled based on instrument calibration data.
format: CSV
issued: 2020-04-17T01:37:34.860417
modified: 2025-11-11T11:17:46.205380
checksum: Checksum

Gatton (South East Queensland) 2019 hourly meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/0c9cb7f9-cc1e-4003-985e-9b86257c5a80/download/gatton-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.5457; Longitude: 152.3288 **AS/NZS 3580.1.1 site classification:** Background **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres.
format: CSV
issued: 2020-04-17T02:03:40.127641
modified: 2025-11-11T11:17:46.197130
checksum: Checksum

Blackwater (Central Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/0196b420-10cf-48f9-b0a4-e1e007f46cd3/download/blackwater-aq-2019.csv
media type: text/csv
description: **Period of operation:** 12 February (site established) to 31 December 2019 **Site location:** Latitude: -23.5627; Longitude: 148.8807 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: - Wind, temperature and relative humidity sensors located 10 metres above ground level. - Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor - Height above ground level: 10 metres. - The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +9 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor - Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor - Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor - Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor - Height above ground level: 10 metres. **PM10/PM2.5:** Scattered light spectrometry (TAPI Model 640X) operated in accordance with USEPA equivalence method designation requirements - Reported concentrations are uncorrected instrument output values.
format: CSV
issued: 2020-04-20T00:10:04.678048
modified: 2025-11-11T11:17:46.169402
checksum: Checksum

North Maclean (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/94e20483-e96e-4442-a895-357aa5be2e6f/download/northmaclean-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.7709; Longitude: 153.0301 **AS/NZS 3580.1.1 site classification:** Background **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor. * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor. * Height above ground level: 10 metres. **Ozone:** UV absorption analyser operated in accordance with AS/NZS 3580.6.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data.
format: CSV
issued: 2020-04-17T00:51:49.782469
modified: 2025-11-11T11:17:46.218793
checksum: Checksum

Boat Creek (Gladstone) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/3853d606-b5ab-4090-b3e5-d43e8f7726f8/download/boatcreek-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -23.8200; Longitude: 151.1539 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies fully **Wind:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +10 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor **Relative humidity (to 26 March):** Capacitive thin film polymer sensor **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5 (to 26 March):** Dichotomous Tapered Element Oscillating Balance (TEOM) Model 1405-DF fitted with Filter Dynamics Measurement System (FDMS) operated in accordance with AS/NZS 3580.9.13 * The FDMS system compensates for the loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * The reported PM10 and PM2.5 concentrations are calculated from running 1-hour average concentrations updated at six minute intervals. * Negative hourly PM10/PM2.5 concentrations down to -5 µg/m^3 resulting from instrument noise at low particle concentrations are reported. **PM10/PM2.5 (from 26 March):** Scattered light spectrometry (TAPI Model 640X) operated in accordance with USEPA equivalence method designation requirements - Reported concentrations are uncorrected instrument output values. **Visibility-reducing particles:** Nephelometer operated in…
format: CSV
issued: 2020-04-19T23:40:20.010926
modified: 2025-11-11T11:17:46.171809
checksum: Checksum

North Ward (Townsville) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/7007390e-6916-48a2-b57d-5479b69b1e02/download/northward-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -19.2509; Longitude: 146.8073 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies, except for: * Isolated trees above height of inlet within 10 metres west of the monitoring site. **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: * Isolated trees within 10 metres west of the monitoring site. * Temperature and relative humidity sensors located 10 metres above ground level. * Rainfall measured by acoustic sensor. **Wind sensor:** Ultrasonic sensor * Height above ground level: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +8 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor * Height above ground level: 10 metres. **Relative humidity:** Capacitive thin film polymer sensor * Height above ground level: 10 metres. **Rainfall:** Vaisala RAINCAP® precipitation sensor * Height above ground level: 10 metres. **Barometric pressure:** Capacitive silicon sensor * Height above ground level: 10 metres. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Sulfur dioxide:** Ultraviolet fluorescence analyser operated in accordance with AS 3580.4.1 * Instrument output offset and/or scaled based on calibration and daily zero/span response data. **PM10/PM2.5:** Scattered light spectrometry (TAPI Model 640X) operated in accordance with USEPA equivalence method designation requirements * Reported concentrations are uncorrected instrument output values. **Visibility-reducing particles:** Nephelometer operated in accordance with AS/NZS 3580.12.1 * Detector spectral response centred at 520 nm. * Instrument output offset and/or scaled based…
format: CSV
issued: 2020-04-17T00:53:29.751687
modified: 2025-11-11T11:17:46.220880
checksum: Checksum

Deception Bay (South East Queensland) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/68cbb103-301b-47d5-ae2b-d81f56fc7c9c/download/deceptionbay-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -27.1935; Longitude: 153.0347 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies, except for: - Trees within 20m to the south-west of the monitoring station **Wind:** Ultrasonic sensor - Height above ground level: 10 metres. - The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +11 degrees to the sensor output value. **Temperature (from 1 September):** Capacitive ceramic sensor. - Height above ground level: 10 metres. **Relative humidity (from 1 September):** Capacitive thin film polymer sensor. - Height above ground level: 10 metres. **Rainfall (from 1 September):** Vaisala RAINCAP® precipitation sensor. - Height above ground level: 10 metres. **Barometric pressure (from 1 September):** Capacitive silicon sensor. - Height above ground level: 10 metres. **Ozone:** UV absorption analyser operated in accordance with AS/NZS 3580.6.1 - Instrument output offset and/or scaled based on calibration and daily zero/span response data. **Oxides of nitrogen:** Chemiluminescence analyser operated in accordance with AS/NZS 3580.5.1 - Instrument output offset and/or scaled based on calibration and daily zero/span response data.
format: CSV
issued: 2020-04-19T23:05:24.354760
modified: 2025-11-11T11:17:46.187413
checksum: Checksum

West Mackay (Mackay) 2019 hourly air quality and meteorological data
type: Distribution
access URL: https://www.data.qld.gov.au/dataset/827a95bc-7160-4510-9a75-b4b4d22042a6/resource/8646f8ac-6afe-4b10-951f-11a9ca13b8c3/download/westmackay-aq-2019.csv
media type: text/csv
description: **Period of operation:** 1 January to 31 December 2019 **Site location:** Latitude: -21.1596; Longitude: 149.1550 **AS/NZS 3580.1.1 site classification:** Neighbourhood **AS/NZS 3580.1.1 compliance (pollutants):** Complies fully **AS/NZS 3580.14 compliance (meteorology):** Complies fully **Wind:** Ultrasonic sensor * Height above ground: 10 metres. * The wind direction sensor is aligned to magnetic north. The reported wind direction is referenced to true north by application of a magnetic declination correction of +9 degrees to the sensor output value. **Temperature:** Capacitive ceramic sensor **PM10 (to10 October):** Tapered Element Oscillating Balance (TEOM) Model 1405 operated in accordance with AS/NZS 3580.9.16 (excluding FDMS requirements) * Measurement values do not compensate for loss of semi-volatile components from the collected particulate matter. * Reported concentrations are uncorrected instrument output values. * Negative hourly PM10 concentrations less than -0.5 µg/m^3 are removed and concentrations between -0.5 µg/m^3 and 0.0 µg/m^3 are set to 0.0 µg/m^3. **PM10/PM2.5 (from 10 October):** Scattered light spectrometry (TAPI Model 640X) operated in accordance with USEPA equivalence method designation requirements * Reported concentrations are uncorrected instrument output values. **Visibility-reducing particles:** Nephelometer operated in accordance with AS/NZS 3580.12.1 * Detector spectral response centred at 530 nm. * Instrument output offset and/or scaled based on calibration and daily zero/span response data.
format: CSV
issued: 2020-04-16T22:46:51.766858
modified: 2025-11-11T11:17:46.253247
checksum: Checksum